
c
23
− insert a wooden lump between the propeller blades and the anti-
cavitation plate.
− keep the propeller pressed against the pin and screw tight the nut.
Picture No. 60.
Storage
To help the endurance of your motor, you must carry out
properly the following storage operations:
Clean the motor and the cooling-water passages.
Switch off the engine as shown in the section "stopping for a long period of
storage ".
Remove the fuel-line connections from the motor.
Clean the fuel filter.
Empty the float chamber.
Remove the spark-plug and pour engine-oil into the hole; turn the flywheel
by hand to distribute the oil in the cylinder; replace the spark-plug.
Change the gearbox-oil.
Check the screws torque.
Grease all the components as shown in the greasing chart.
Inspect the anode.
Empty the fuel tank.
Store the motor in the vertical position and in a dry, not to cold place.
The storage operations must be carried out by qualified staff.
Komentáře k této Příručce